Cartell CP3-200-5W CP3 Gate Free Exit Wand 200ft Cable- 5 Wire

This is a five-wire, self-contained system with no external board to install. Simply hook up wires to security or home automation panel (TRIP INPUT) or directly to gate operator. Comes with 10, 100, 200, 300, or 500 feet direct burial cable attached. This unit comes with 200' of cable.

*This item is no longer available. Click here to view its replacement: The CP4-200.

System Description:

♦ Covers 12 foot wide driveway when buried beside driveway
♦ Single-zone system
♦ Fully self-contained system—no external circuit board to install
♦ Exceptionally Solar friendly!
♦ Lowest stand-by current in the industry
♦ Universal voltage
♦ Normally no earth grounding required
♦ RFI/EMF protected
♦ Comes in 3-Wire and 5-Wire models
♦ Long field life and reliable electronics

System Components:

♦ This is a fully self-contained system offering a relay closure. No outboard devices required.
♦ Probe comes with 10, 100', 200', 300', or 500' direct burial cable attached

System Application:

♦ Provides a relay closure when hooked up directly to the TRIP INPUT on home automation panel or security panel.
♦ Provides a trigger to activate transmitters, pagers and CCTV.
♦ Provides a trigger to activate gate operators.

Technical Specifications:

♦ Power Required: 6-31 VAC or 10-40 VDC
♦ Standby Current: 150 Microamps maximum
♦ 25 Milliamp maximum alarm current
♦ Relay Contacts

• 3 Wire: SPST, Trip to GROUND
• 5 Wire: SPDT, floating, N.O. or N.C. (Form C)

♦ Relay Contact Rating: 1 amp /  24 VDC min. load
♦ Relay Time: 2 to 3 seconds
♦ Temperature Range: -25 F to 125F
♦ Dimensions: 20" long x 075" diameter