Diablo Low Power Single Channel Plug and Play Vehicle Loop Detector (10-30 V AC/DC) - DML-9LP

The DML-9LP Vehicle Detector by Diablo will operate on any voltage from 10 to 30 V AC/DC and will draw about 1 milliamp of current with no vehicle over the sensor.
Part Number: DML-9LP-DETECTOR

$83.25 each
OR
 

Details

Diablo Low Power Single Channel Plug and Play Vehicle Loop Detector (10-30 V AC/DC) - DML-9LP

The DML-9LP Vehicle Detector by Diablo will operate on any voltage from 10 to 30 V AC/DC and will draw about 1 milliamp of current with no vehicle over the sensor. This micro-sized detector features no user settings and will automatically configure itself once powered up. The DML-9LP will only operate in pulse mode, presence mode is not possible.

Features:

  • Fail-Secure Operation
  • Wide Range Of Low-Voltage Operations
  • Plug and Play, Switchless and Self-Adapting
  • Will Not Interfere With Other Loop Detectors
  • Small Profile Making It Ideal For Nearly Every Installation
  • Designed For Solar Applications With Diablo Controls' Mini-Loop

Specifications:

  • Vehicle Sensor: Diablo Mini-Loop (Magnetometer)
  • Operating Temperature: -35°F to 165°F
  • Dimensions: 1.52" (H) x 2.90" (W) x 1.56" (D)
  • Output Rating: Relay Outputs - 1 amp @ 125VAC max.
  • Enclosure: Impact Resistant, High Temperature Plastic
  • Operating Voltage: 10 to 30V AC/DC (1 Milliamp When Not In Detect)

Removable 7-Pin Terminal Block:

  1. Relay Normally Closed (NC) - Contact Opens For 125 ms On Detect
  2. Relay Common
  3. Relay Normally Open (NO) - Contact Closes For 125 ms On Detect
  4. Power Common
  5. Power In (10 to 30 V AC or +DC)
  6. Mini-Loop
  7. Mini-Loop

DML-9LP Cut Sheet

DML-9LP Cut Sheet Installation Guide

SKU DML-9LP-DETECTOR
Product Loop Detector
Product Type Loop Detectors
Loop Channels Single Channel
Voltage 10-30V AC/DC
Pin Removable 7-Pin Terminal Block
Secure Side Status Fail-Secure
Manufacturer Diablo Controls, Inc.


You may also be interested in the following product(s)