Diablo DSP-6LP Microdetector for SOLAR Loop Detectors (10-30V, AC or DC)
Details
Diablo DSP-6LP Microdetector for SOLAR Loop Detectors (10-30V, AC or DC)
The DSP-6LP vehicle detector is designed for solar powered gate applications. This detector will operate on any voltage from 10 to 30 Volts AC or DC and draws approximately 1 milliampere while waiting for a car. The power LED winks continuously once per second to indicate the detector is operating in the low power mode. The DSP-6LP detector beats all competition for reliability, simplicity and current consumption.
Features:
- Micro-Sized Detector
- Tunes Itself To Best Operating Frequency
- Virtually Crosstalk Free In Most Applications
- Automatically Adjusts Sensitivity Level When Used On Different Sized Loops
- Environmental Conditions Constantly Compensated With Hypertrack Software
- Preset To The Normal Sensitivity Level Used In Parking/Access Control Applications
- Works On Battery-Powered And Other Parking And Access Control Loop Applications
Specifications:
- Power: 10 to 30 Volts AC or DC
- Operating Temperature: -35°F to 165°F
- Removable 7-pin terminal block: NC, C, NO
- Indicators: Separate Power and Detect LEDs
- Dimensions: 1.52" (H) X 2.9" (W) X 1.56" (D)
- Ordering Information: DSP-6LP standard version
- Relays: Common, NO, And NC Contacts Available
- Output Ratings: Single Output, 1 Amp Relay At 30 VDC
- Sensitivity: Automatic, compensates for large loops and large lead-ins
- Loop Size: Works on any in-ground inductive loop from 20 to 1200 Mh
- Approximately 1 mA (no car and all loop sizes) and less than 25 mA with a car on loop
| SKU | DSP-6LP |
|---|---|
| Product | Loop Detector |
| Product Type | Loop Detectors |
| Loop Channels | Single Channel |
| Voltage | 10-30V AC/DC |
| Pin | Removable 7-Pin Terminal Block |
| Secure Side Status | Fail-Secure |
| Manufacturer | Diablo Controls, Inc. |