AES 3 Channel Transmitter With Lock and Unlock function (For Use With 200 Code Receiver) - E-REMOTE

Details

AES 3 Channel Transmitter With Lock and Unlock function (For Use With 200 Code Receiver) - E-REMOTE

The 3-Channel 433.39 MHz Transceiver Remote from AES is compatible with AES E-loops and has waterproof housing to function in weather conditions. The operation functions from a single coin cell 2032 lithium battery and is classified to work with 3 channels. The lock and unlock function helps dictate who can use the remote.

Coding The Remote To E-Trans 50:

• Press And Then Release The Code Button
• After, the Code LED Will Light Up
• If Choosing To Code A Remote Handset, Press The Remote Button
• This Remote Button Should Be Where You Would Like To Activate The Transceiver.
• The Code LED Will Then Flash, Ensuring The Coding Sequence Worked
• Press The Remote Button Once Again, And The Code LED Should Flash
• This Indicated The Coding Is Completed
• You Can Continue With More Remotes Or Press The Coded Remote Once To Exit

Coding Remote To E-Trans 200

• Rotate Dial Until It Reaches CODE DEVICE
• Press BP
• CODE LEARN will come up and then a green LED will flash showing code sequence
• To code Remote Handset, Press Remote Button, Then You Will See ACCEPT REM 1, And Then Screen Will Show CONFIRM REM
• After seeing CONFIRM REM, press the remote button, and Screen will show REM 1 CODED. Can Follow With Second Remote After This
• To Delete A Remote Handset, Rotate Dial to DELETE ALL And Hold PB For Five Seconds

Cut SheetInstructions