Details

AES Commercial eLoop with eTrans100 Transceiver & Presence Mode (Radar) - EL00C-RAD-KT

The Commercial Radar Loop kit uses the latest technology to detect vehicles without digging or wiring. The kit includes an e-Trans 100 transceiver, two concrete fixing bolts, and a magnet. The wireless vehicle detection system can sense the presence of upcoming vehicles and submit this transmission to a transceiver for gate activation. Once the vehicle is detected, the e-loop will then switch to radar mode. These sensors can be installed on either the surface of an exit or entryway. The radar loop comes with four replaceable Lithium batteries. The radar sensor works to detect vehicles that are stopped on top of the e-loop. Using radar and magnetometer sensors, the vehicle radar loop can sense a vehicle even if the magnetic field drops. Change radar settings with the e-diagnostics remote.

Specifications:

• Includes e-Loop, eTrans100 transceiver, magnet & concrete fixing bolts
• 2 channel transceiver
• Long range with SMA connector for external antenna options
• Stores 2 x e-Loops and 50 x remotes in each channel
• 10-28VAC or 10-36VDC power input
• Low current draw 12mA in standby, can be set to LDC mode
• 4.5mA for solar applications
• 433.39 MHz frequency
• 250 Hz bandwidth
• 128bit AES encryption for total security
• 2 x 1A relay contacts
• NC/NO/COM outputs
• Can be set to pulse latch or hold mode
• Suspension inputs for each relay