AES E-Loop Commercial Radar Loop Kit With PRESENCE MODE and LCD Transceiver - ELOOC-RAD-KLT

Details

AES E-Loop Commercial Radar Loop Kit With PRESENCE MODE and LCD Transceiver - ELOOC-RAD-KLT

The Commercial Radar Loop kit uses the latest technology to detect vehicles without digging or wiring. The kit includes an e-Trans 100 transceiver, two concrete fixing bolts, and a magnet. The wireless vehicle detection system can sense the presence of upcoming vehicles and submit this transmission to a transceiver for gate activation. Once the vehicle is detected, the e-loop will then switch to radar mode. These sensors can be installed on either the surface of an exit or entryway. The radar loop comes with four replaceable Lithium batteries. The radar sensor works to detect vehicles that are stopped on top of the e-loop. Using radar and magnetometer sensors, the vehicle radar loop can sense a vehicle even if the magnetic field drops. Change radar settings with the e-diagnostics remote.

Kit Includes:

• E-Loop Presence Mode
• E-Trans 100 Transceiver
• Two Concrete Fixing Bolts
• Magnet

Key Features:

• Easy Installation
• Set Radar Settings Including Dead Zones, Sensitivity, And Magnetic Field Release Levels
• 6-Year Battery Life
• Reliable Radio Communications With Transceivers
• High Security 128-Bit AES Encryption
• Presence Mode Detection
• 8 Hz Sampling Rate
• Auto Calibration
• IP68 Ingress Protection

Specifications:

• Frequency: 433.39 MHz
• Modulation: FSK
• Bitrate: 9.6 KBPS
• Bandwidth: 250 kHz
• Antenna Type: PCB
• Nominal Output Power: 10 dBm
• Receive Sensitivity: -126.2 dBm
• Security: 128-Bit AES Encryption
• Power: 4 * 3.6 V 2700ma
• Operating Temp: -4°F To 176°F