AES E-Loop In-Ground Commercial Radar loop only PRESENCE MODE - EL00IG-RAD

Details

AES E-Loop In-Ground Commercial Radar loop only PRESENCE MODE - EL00IG-RAD

This commercial radar e-loop made for presence mode only is an inground wireless vehicle detection system that utilizes magnetometer sensors to detect vehicle movements. When a vehicle is detected, the information is transmitted to a transceiver for gate activation. This sensor is installed near the entry of a gate or passageway using Sikaflex. This system has a replaceable Lithium battery and can handle any vehicle weight. Gates and door controllers must have an open input and auto close function enabled. The radar sensor works to detect vehicles that are stopped on top of the e-loop. Using radar and magnetometer sensors, the vehicle radar loop can sense a vehicle even if the magnetic field drops. Change radar settings with the e-diagnostics remote.

Key Features:

• Easy Installation
• Set Radar Settings Including Dead Zones, Sensitivity, And Magnetic Field Release Levels
• 6-Year Battery Life
• Reliable Radio Communications With Transceivers
• High Security 128-Bit AES Encryption
• Exit Detection Mode
• 8 Hz Sampling Rate
• Auto Calibration
• IP68 Ingress Protection

Specifications:

• Frequency: 433.39 MHz
• Modulation: FSK
• Bitrate: 9.6 KBPS
• Bandwidth: 250 kHz
• Antenna Type: PCB
• Nominal Output Power: 10 dBm
• Receive Sensitivity: -126.2 dBm
• Security: 128-Bit AES Encryption
• Power: 4 * 3.6 V 2700ma
• Operating Temp: -4°F To 176°F