CarSense101 Full Package 3-Wire Direct Burial Vehicle Motion Detector - CarSense-Package

Details

CarSense101 Full Package 3-Wire Direct Burial Vehicle Motion Detector - CarSense-Package

The EMX Full Package 3-Wire Direct Burial Vehicle Motion Detector detects changes in earth's magnetic field within 12' of the probe. It will detect vehicles moving at a minimum speed of 5 mph, therefore it will not detect a stationary vehicle. It can be used in free exit applications to open gates for guests without requiring access equipment such as a key fob or keypad code. Other applications include wiring this Vehicle Motion Detector to a residential or commercial automation system to detect a vehicle moving down a driveway with cable length options of 50', 100', 150', or 200'. This Vehicle Motion Detector has a watertight PVC construction for reliable direct burial applications and an energy efficient, low current consumption suitable for solar applications. This Vehicle Motion Detector can be used for standard or high traffic areas in which the probe can be buried up to 24" deep for higher traffic and can be used as a 12V AC/DC, 24V AC or 24V DC detector.

Features:

• 3-Wire Shielded Probe Cable
• Suitable For Solar Applications
• Energy Saving Low Current Consumption
• Suitable For High Traffic, Bury Up To 24" Deep
• Probe Input Circuitry Protected By Surge Suppressors
• Lead Cable Length Options of 50', 100', 150', or 200'
• Pre-Wired Harness Onto Lead Wire For Easy Installation
• Detects Ferrous Materials In Motion, Will Not Detect Aluminum
• Easy To Use Sensitivity Adjustments Dependent On Mass And Speed
• Detects Changes In Earth's Magnetic Field Up To 12' Near Probe
• In The Event Of Power Failure, Settings Are Stored And Saved In A Non-Volatile Memory
• Watertight PVC Composition Ensures Long-Lasting, Reliable Performance As Direct Burial Probe

Full Package Includes:

• 50', 100', 150', or 200' Lead-In Wire Motion Sensor Probe
• 11-Pin Mountable Loop Detector Socket Base
• Outdoor Buried Driveway Vehicle Detector

Specifications:

• Relay Type: DPDT
• Detect Current: 50 mA Maximum
• Dimension: 2.2" x 1.6" x 3.25"
• Relay Rating: 1A 24V DC 120V AC
• Stand-By Current: 2.5 Ma Maximum
• Sensitivity: High, Low Adjustment
• Temperature Range: -40°F To 170°F
• Connector: 86CP11 11 Pin Connector
• Off Delay: 1 To 5 Seconds Adjustment
• Power Supply: 9 - 41 VDC Or 6 - 29 VAC
• Detect Indicator: High Intensity Red LED
• Power Supply Tolerance: +/- 20% From Power Rating
• Control Unit Housing: Break Resistant Polycarbonate
• Surge Protection: MOV, Neon And Silicon Protection Devices
• Probe: PVC Water Tight Housing With Shielded Direct Burial Lead-In Cable

Installation Manual