CarSense303 LRS-C1 Single Saw-Cut Magneto-Resistive Vehicle Detector Controller For Single Sensor - EMX LRS-C1

The CarSense303 LRS-C1 Single Saw-Cut Magnetoresistive Vehicle Detector, designed and manufactured by EMX, is a cost-efficient, easy to install, 3D vehicle presence detecting versatile detector. It features a quick set up with the ULTRAMETER™ technology, high-sensitivity, and capabilities for above ground or below ground installations.
Part Number: LRS-C1

$120.33 each


CarSense303 LRS-C1 Single Saw-Cut Magneto-Resistive Vehicle Detector Controller For Single Sensor - EMX LRS-C1


The EMX CarSense LRS-C1 Vehicle Detector features advanced three-axis, magneto-resistive sensing technology that responds to changes in the Earth's magnetic field caused by ferrous objects. Three sensing elements provide measurements in the X, Y and Z axes to improve detection sensitivity when used in either above or below ground installations. The CS303 LRS-C1 is equipped with the new DETECT-ON-STOP™ or (DOS®) feature, which allows detection only when a vehicle has come to a complete stop. This exclusive feature is unique to EMX and is a major advantage if you want to ignore cross traffic in tight spaces. The detector's compact, the loop-less design reduces installation costs when compared to traditional inductive loop technology.


  • Stand-Alone Sensor
  • Cost-Effective Vehicle Detector
  • Select X, Y, Z axis Independently
  • 3D Presence Detection Of Vehicles
  • Single Saw-Cut Installation With Flat Pack Model
  • Quick Setup With The ULTRAMETER™ Sensitivity Display
  • Sensor Stores Ambient Background And Settings In Non-Volatile Memory
  • Ignores Cross Traffic In Tight Spaces With DETECT-ON-STOP™ Feature
  • Remote Control Module For Programming And Additional Relay Contact Output
  • ULTRAMETER™ Displays Optimum Sensitivity Setting/Crosstalk Interference
  • DETECT-ON-STOP™ Allows Detection Only When A Vehicle Has Come To A Complete Stop


  • Boom Gate Control
  • Truck/Lorry Detection At Loading Docks
  • Drive-Thru And Car Wash Vechicle Detection
  • Vehicle Counting In Car Parks And Toll Booths
  • Truck And Tow-Motor Detection For Industrial Gates And Doors


  • Detection Range: 5'
  • Outputs: SPDT Relay
  • Response Time: 125 ms
  • Environmental Rating: IP30
  • Power: 12-30V DC and 24V AC
  • Housing Material: ABS (Plastic)
  • Connection: 10-Position Screw Terminal
  • Dimensions: 3"" (L) X 0.9"" (W) X 2.75"" (H)
  • Operating Temperature Range: -40° to 180°F
  • Output Current Rating: Relay - 1 A @ 24-120V DC
  • Supply Protection: Reverse Polarity And Fuse Protected

Instruction Manual

Specification Sheet

Product Vehicle Detector
Manufacturer EMX Industries, Inc.
Product Type Sensor

You may also be interested in the following product(s)