Diablo Two Channel Directional Logic 11 Pin Detector - DSP-20

Details

Diablo Two Channel Directional Logic 11 Pin Detector - DSP-20

The DSP-20 is a dual-channel vehicle loop detector with built-in directional logic controls. The front panel switches allow the user to select between two independent channels or directional logic modes. It uses advanced channel scanning technology to provide superior noise tolerance and its scanning technology allows for the placement of loops closer together or overlapping. Available in three different configurations: Normally Open relay contacts, Normally Closed relay contacts, or Solid-State outputs.

Features

• Directional Logic mode
• Advanced technology and superior noise tolerance
• Fail-safe or fail-secure operation
• Presence or Pulse operation
• 4 selectable sensitivity settings and sensitivity boost
• Loop monitoring provides a fault display if loop failure is detected

Specifications

• Response Time: 150 ms ñ25 ms
• Operating Voltages Relays: DC - 10.5 volts to 35 volts, AC - 9 volts to 28 volts
• Operating Voltages Solid-State: DC - 7.5 volts to 35 volts, AC - 6 volts to 28 volts
• Operating Current Relay: 120 milliamps maximum, 25 milliamps typical.
• Operating Current Solid-State: 65 milliamps maximum, 25 milliamps typical.
• Output Ratings Relay: 1 amp @ 125 volts
• Output Ratings Solid State: 50 milliamps @ 30 volts
• Pulse Output: 150ms on,150ms off