Diablo Plug-and-Play Micro Vehicle Loop Detector (10-30V, AC or DC) - DSP-40S

Details

Diablo Plug-and-Play Micro Vehicle Loop Detector (10-30V, AC or DC) - DSP-40S

The Diablo DSP-40S Plug-and-Play Micro Vehicle Detector operates on any voltage between 10 and 30 volts and works with both AC and DC. It's compatible with many female pitch headers, commonly used by certain gate openers and access control devices. One of its benefits is that it's one of the few vehicle detectors on the market which can operate on a power supply between 10 and 30 Volts AC or DC. Under most normal operating conditions, the DSP-40S is nearly cross-talk free and it's engineered to handle parking, drive through and access control applications.

Features:

• Separate LEDs for Power/Fail and Vehicle Detection
• Functions Perfectly Where Solid-State Outputs Are Required
• Ignores Power Interruptions Of Roughly 1 1/2 Seconds Or Less
• Reset/Sensitivity Push Button Resets Unit And Shows Present Sensitivity Level
• Both Detect And Fail Outputs Can Be Set To Four Distinct Sensitivities For Different Vehicle Access Solutions
• In Event Of Failed Loop, Green LED Power Indicator Flashes Slowly If The Loop Circuit Is Open And Quickly If Loop Circuit Shorts

Specifications:

• Output: Solid State
• Two Loop Inputs
• Three Power Ports
• Two Fail Outputs
• One Detection Output
• Transient Voltage Protected
• Dimensions: 2.4" (H) X 0.8" (W) X 2.25" (D)
• Operating Temperature: -35°F To 165°F
• 30 Ma Maximum Current Sink
• 10 Position Molex Type Connector
• Power Supply: Between 10 And 30 Volts Ac Or Dc With Up To A 20 Ma Max
• Loop Size: Can Operate Any In-Ground Inductive Loop From 20ΜH To 1500 ΜH

DSP40 Cut Sheet