E-Loop Commercial exit mode commercial kit with ETRANS100

The Commercial e-Loop is the one of the newest safety device from AES that acts as a safety loop but does not require digging or removing pavers. Use this exit mode e-loop before an exit.
Part Number: EL00C-KT
$510.72 each
$510.72 each


E-Loop Commercial exit mode commercial kit with ETRANS100

With no digging required, the e-loop (exit mode) is a Commercial Wireless Vehicle Detection System that uses the technology of magnetometer sensors to sense when vehicles move or are near the e-loop. When the e-loop detects a vehicle, this information is transmitted to a transceiver to activate the gate.Install these sensors on the surface of an exit passage. Four replaceable Lithium batteries come with the system. The e-loop is strong enough to withstand almost any vehicle weight. This is an exit-only commercial e-loop.

Key Features:

  • Easy Installation
  • 10-Year Battery Life
  • Reliable Radio Communications With Transceivers
  • High Security 128-Bit AES Encryption
  • Exit Detection Mode
  • 8 Hz Sampling Rate
  • Auto Calibration
  • IP68 Ingress Protection


  • Frequency: 433.39 MHz
  • Modulation: FSK
  • Bitrate: 9.6 KBPS
  • Bandwidth: 250 kHz
  • Antenna Type: PCB
  • Nominal Output Power: 10 dBm
  • Receive Sensitivity: -126.2 dBm
  • Security: 128-Bit AES Encryption
  • Power: 4 * 3.6 V 2700ma
  • Operating Temp: -4°F To 176°F

Transceiver Specifications

  • Two-Channel
  • Stores 2 e-Loops and 50 remotes per channel
  • 10-28VAC or 10-36VDC power input
  • Low 12mA current draw in standby mode
  • Optional LDC mode
  • 4.5mA (Solar Applications)
  • Frequency: 433.39 MHz
  • Bandwidth:250 Hz
  • 128bit AES encryption
  • 2 x 1A relay contacts
  • Pulse latch or hold mode
Name E-Loop Commercial exit mode commercial kit with ETRANS100
Product E-Loop Kit
Loop Type Magnetometer Detection
Installation Method Surface Mount
Manufacturer AES Global, LLC
Price $510.72