E-Loop inground commercial controller exit mode inground kit with ETRANS100

Details

E-Loop inground commercial controller exit mode inground kit with ETRANS100

This e-loop made for exit mode only is an inground wireless vehicle detection system that utilizes magnetometer sensors to detect vehicle movements. When a vehicle is detected, the information is transmitted to a transceiver for gate activation. This sensor is installed near the exit where the gate or passageway using Sikaflex. This system has a replaceable Lithium battery and can handle any vehicle weight. Gates and door controllers must have an open input and auto close function enabled.

Key Features:

• Easy Installation
• 10-Year Battery Life
• Reliable Radio Communications With Transceivers
• High Security 128-Bit AES Encryption
• Exit Detection Mode
• 8 Hz Sampling Rate
• Auto Calibration
• IP68 Ingress Protection

Specifications:

• Frequency: 433.39 MHz
• Modulation: FSK
• Bitrate: 9.6 KBPS
• Bandwidth: 250 kHz
• Antenna Type: PCB
• Nominal Output Power: 10 dBm
• Receive Sensitivity: -126.2 dBm
• Security: 128-Bit AES Encryption
• Power: 4 * 3.6 V 2700ma
• Operating Temp: -4°F To 176°F

Transceiver Specifications

• Two-Channel
• Stores 2 e-Loops and 50 remotes per channel
• 10-28VAC or 10-36VDC power input
• Low 12mA current draw in standby mode
• Optional LDC mode
• 4.5mA (Solar Applications)
• Frequency: 433.39 MHz
• Bandwidth:250 Hz
• 128bit AES encryption
• 2 x 1A relay contacts
• NC/NO/COM
• Pulse latch or hold mode