EMX Ultraloop Two Channel Multi Voltage Vehicle Loop Detector (Multi Voltage 12VDC-240VAC) - EMX ULT-MVP-2U

Details

EMX Ultraloop Two Channel Multi Voltage Vehicle Loop Detector (Multi Voltage 12VDC-240VAC) - EMX ULT-MVP-2U

The ULT-MVP-2 two-channel vehicle loop detector senses metallic objects near an induction loop. This detector automatically adjusts from 12 VDC up to 240 VAC, eliminating the installer’s need to match available power to an appropriately rated vehicle detector. The ULTRAMETER™ display makes set-up easy by displaying the optimum sensitivity setting required to detect a vehicle positioned near the loop. Ten sensitivity settings allow for fine adjustment of the detection level. The ULT-MVP-2 provides relay contact outputs indicating vehicle presence for each channel separately and AB logic for direction indication. The relay output for each channel may be set for pulse or presence or the EMX exclusive feature, Detect-on-Stop™ (DOS®). The ULT-MVP-2 features an automatic sensitivity boost (ASB) and infinite or normal (5-minute) presence. Four frequency settings provide flexibility in preventing crosstalk in multi-loop applications.

Key Features:

• Single or Dual Channel Unit
• Designed Specifically For US Wiring (CE Compliant)
• 10 Sensitivity Settings
• 4 Operating Frequencies
• Socket Mount Size: 11 Pin
• Ignores Cross-Traffic In Tight Spaces With The DETECT-ON-STOP™ Feature
• Fits Into Small Operator Housings, Increasing Available Space
• Easy To Install and Setup With The ULTRAMETER™ Sensitivity Display
• Low Current Draw – Environmentally Friendly Green Product
• Easy Identification of Interference Problems Using The Crosstalk and RFI Interference Display
• ULTRAMETER™ Displays Optimum Sensitivity Setting/Crosstalk Interference
• Automatic Sensitivity Boost (ASB), Delay, Fail-Safe/Fail-Secure, and Infinite or Normal (5 min.) Presence
• DETECT-ON-STOP™ Allows Detection Only When a Vehicle Has Come To a Complete Stop On The Loop

Technical Specifications:

• Sensitivity: 10 Levels, 0-9
• ULTRAMETER™ Display: Indicates Optimum Sensitivity Level, 0-9 Diagnostic Aid
• Loop Frequency: 4 Settings (Low, Med-Low, Med-High, High)
• Loop Inductance: 20…1000µH (Q factor > 5)
• Grounded loop: Isolation Transformer Allows Operation With Poor Quality Loops
• Automatic Tuning: Detector Tunes To Loop On Power-Up and Following Frequency Count Function
• Environmental Tracking: Automatic Compensation
• Surge Protection: Loop Circuitry Protected By Surge Suppressors
• Channel 1 Relay: SPST Relay Contacts (Form A)
• Channel 2 Relay: SPST Relay Contacts (Form A)
• Contact Rating (Resistive Load): 2A @ 30VDC, 0.5A @ 125VAC
• Detect / Channels 1 and 2: Red LED
• Detect-On-Stop: Requires Vehicle To Stop For a Minimum of 1 Second (1-2s Typical)
• ASB (Automatic Sensitivity Boost): Increases Sensitivity After Initial Detection To Prevent Dropout Due To High-Bed Vehicles
• Power: 12VDC Up To 60 VDC (Max. 1.0 VA) / 12VAC Up To 240 VAC (48…62Hz) (Max. 2 VA)
• Operating Current: 37mA Standby / 55mA Detect
• Operating Temperature: -40°F to 180°F (0-95% Relative Humidity)
• Dimensions (L x W x H): 2.9” x 1.2” x 3.1”
• Housing Protection Rating: ABS Plastic, IP30
• Connections: Socket Mount 11 Pin Male (JEDEC B11-88)