Reno A&E Loop or Free Exit Probe Detector 1 Channel 1 Output Low Power 8 - 40 VDC or 8 - 28 VAC

Details

Reno A&E Loop or Free Exit Probe Detector 1 Channel 1 Output Low Power 8 - 40 VDC or 8 - 28 VAC

The XLP-8 from Reno A&E is specifically designed as a small, simple to use, extremely low current draw, vehicle detector capable of using an inductive loop or a magnetometer sensor (a.k.a. Mini-Loop or Probe). The extremely low power use, less than 1 milliamp, makes this detector ideal for solar and battery backed-up applications.

The XLP-8 can be connected to a standard inductive loop or one of Reno A&E magnetometer based probes. The Reno A&E probe is a small pipe shaped device approximately 4-1/2 by 1 and is designed to be buried in the ground to detect vehicles.

Specifications

• Loop Inductance: 20 to 1500 (including lead-in)
• Operating Temperature: -35F to 165F (-37C to 74C)
• Operating Voltage: 8 volts to 40 volts DC or 8 volts to 28 volts AC
• Sensitivities 1-6: Without detection is 0.85 ma maximum, With a detection is 30.00 ma maximum
• Sensitivities 7-9: Without detection is 1.60 ma maximum, With a detection is 30.00 ma maximum
• Output Ratings: AC: 125 volts @ 1 amp, DC: 60 volts @ 1 amp
• Enclosure: Impact resistant plastic, 2.362 (H) x 0.866 (W) x 2.008 (D), 60.0 mm (H) x 22.0 mm (W) x 51.0 mm(D)