Miller Edge Infra-Red Control Unit; Converts a monitored photo optic output to non-monitored - MIRCU-02
Details
Miller Edge Infra-Red Control Unit; Converts a monitored photo optic output to non-monitored - MIRCU-02
The Infra-Red Control Unit converts a pulsed output from a monitored photo optic device to a normally open, non-monitored input. This allows you to use monitored photo optic devices on older gate openers that were created before 2010. In addition, the MIRCU-02 from Miller Edge can add another secondary entrapment device if only one pulsed input exists. If power is lost, a failsafe on the MIRCU reports issues to the opener.
Key Features:
- Comes With Fail Safe Signalization
- Perfect To Be used With Pre-2010 Commercial Door Openers
- Includes NEMA 4 Protection Against Dust And Moisture
- 1-Year Warranty
- Changes Monitored Pulsed Output To Non-Monitored, Dry Contact Output
Specifications:
- Response Time: 30 Ms Nominal
- Operating Temperature: -18°C to 55°C (0°F to 130°F)
- Power Source: 12-24 volts AC/DC
- Current Consumption: 50 mA Max.
- Relay Rating: 5 A, 250 volts AC
- External Device Power: Standard Photo Eye Power Connection
- Input: 2-Wire Pulsed (Monitored) Photo Eye
- Output: Normally Open And Normally Closed (Non-Monitored, Fail Safe)
- Housing Material: Polycarbonate
- Degree Of Protection: NEMA 4, Class 2 Device
- Dimensions: 1.75”H x 1.75”W x 6.625”L (4.45 x 4.45 x 16.83 cm)
SKU | MIRCU-02 |
---|---|
Input Voltage | 12 DC, 12 AC, 24 DC, 24 AC |
Product | Photo Eye |
Monitored/Non-Monitored | Non-Monitored |
Manufacturer | Miller Edge, Inc. |