Miller Edge MG110 4 ft Monitored T2 Gate Sensing Edge (2 ft Lead Wire) With Channel

Designed to protect draw-in posts, pockets, and pivot points in gate installations, this 4 ft Monitored T2 Gate Sensing Edge has a standard 2 ft lead wire and includes the edge, mounting channel, molded nylon end caps, and stainless steel self-drilling mounting screws.This easy to install sensing edge can be mounted vertically or horizontally.
Part Number: MG110-K-2E-04-T2
$77.91 each
$77.91 each
OR
 

Details

Miller Edge MG110 4 ft Monitored T2 Gate Sensing Edge (2 ft Lead Wire) With Channel

The Miller Edge MG110 Monitored Sensing Edge is designed to protect draw-in posts, pockets, and pivot points in gate installations. It has been tested as a recognized component to comply with the ANSI/UL325 Door, Drapery, Gate, Louver, and Window Operators and Systems standard. The Monitored Sensing Edge is 4 ft in length, with a standard 2 ft lead wire. This edge includes the mounting channel, molded nylon end caps, and stainless steel self-drilling mounting screws. The newly designed mounting channel easily sleeves the edge and the screws drill into the channel without causing any damage to the sensing edge. This reliable, 10k Resistive Monitored Sensing Edge has touch sensity signaling that will stop/reverse a gate if contact is made.

Features:

  • Color: Black
  • Small Profile
  • Touch Sensitive Sensing
  • Wire Outlet Location: End
  • T2 Monitored Sensing Edge
  • ANSI/UL325 Recognized Component
  • Mounts Vertically Or Horizontally

Includes:

  • (1) Sensing Edge
  • (1) ME110-C Mounting Channel
  • (2) Molded Nylon End Caps
  • (2) Stainless Steel Self-Drilling Mounting Screws

Applications:

  • Barrier Arms
  • Slide Gate Draw-In Posts
  • Pockets And Pivot Points

Specifications

  • Edge Length: 4 ft
  • Material: Flexible PVC
  • Dimensions: 0.875" x .75" x 4'
  • Lead Wire: SJTO, 22 Gauge Standard 2ft
  • Contact Element: Alumaglas®
  • End Caps: Molded Nylon With Stainless Steel Screws
  • Electrical Maximum: 24 volts AC/DC,1/2 amp
  • Mounting Channel Material: Rigid PVC
  • Electrical Diagram: 2 Wire N.O. Configuration
  • Temperature Range: -30°F to +155°F
  • For Safe Operation, Use A Maximum 24 Volt AC/DC Power

Care of the MG110

Minimum care is required for the MG110 since it is manufactured with only the most durable materials and the highest quality control standards. However, sensing edges should be examined regularly for cuts or punctures which could damage internal components. Check wiring to be sure connections are secure. When properly maintained, the MG110 offers years of trouble free operation.

Monitored Sensing Edge Designator
2 Wire Edge Designator Designator Description Operator Manufacturer Outlet Wire Color Code
T1 8.2K Ohm Resistor Typically European Use Green
T2 10K Ohm Resistor Cornell / US Gear Blue
LiftMaster / Chamberlain
Linear
Manaras
Micanan
Raynor
VE Power Door
Cookson
Lawrence
T3 Diode Capacitor Overhead Door (Only) Red
T4 Capacitor Linear (Transmitter) White
T5 6.8K Ohm Resistor Custom Applications Orange
T6 270K Ohm Resistor LiftMaster CPS Board Violet
4 Wire Edge Designator N/A LiftMaster None

SKU MG110-K-2E-04-T2
Input Voltage 24 DC, 24 AC
Cover Color Black
Product Type Edges
Edge Type Standard
Edge Installation Type Slide In
Color Black
Monitored/Non-Monitored Monitored
Manufacturer Miller Edge, Inc.