Miller Edge MG110 5 ft Monitored T2 Gate Sensing Edge (10 ft Lead Wire) With Channel
Details
Miller Edge MG110 5 ft Monitored T2 Gate Sensing Edge (10 ft Lead Wire) With Channel
The Miller Edge MG110 Monitored Sensing Edge is designed to protect draw-in posts, pockets, and pivot points in gate installations. It has been tested as a recognized component to comply with the ANSI/UL325 Door, Drapery, Gate, Louver, and Window Operators and Systems standard. The Monitored Sensing Edge is 5 ft in length, with a 10 ft lead wire. This edge includes the mounting channel, molded nylon end caps, and stainless steel self-drilling mounting screws. The newly designed mounting channel easily sleeves the edge and the screws drill into the channel without causing any damage to the sensing edge. This reliable, 10k Resistive Monitored Sensing Edge has touch sensity signaling that will stop/reverse a gate if contact is made.
Features:
- Color: Black
- Small Profile
- Touch Sensitive Sensing
- Wire Outlet Location: End
- T2 Monitored Sensing Edge
- ANSI/UL325 Recognized Component
- Mounts Vertically Or Horizontally
Includes:
- (1) Sensing Edge
- (1) ME110-C Mounting Channel
- (2) Molded Nylon End Caps
- (2) Stainless Steel Self-Drilling Mounting Screws
Applications:
- Barrier Arms
- Slide Gate Draw-In Posts
- Pockets And Pivot Points
Specifications
- Edge Length: 5 ft
- Material: Flexible PVC
- Lead Wire: SJTO, 22 Gauge 10ft
- Contact Element: Alumaglas®
- End Caps: Molded Nylon With Stainless Steel Screws
- Electrical Maximum: 24 volts AC/DC,1/2 amp
- Mounting Channel Material: Rigid PVC
- Electrical Diagram: 2 Wire N.O. Configuration
- Temperature Range: -30°F to +155°F
- For Safe Operation, Use A Maximum 24 Volt AC/DC Power
Care of the MG110
Minimum care is required for the MG110 since it is manufactured with only the most durable materials and the highest quality control standards. However, sensing edges should be examined regularly for cuts or punctures which could damage internal components. Check wiring to be sure connections are secure. When properly maintained, the MG110 offers years of trouble free operation.
| Monitored Sensing Edge Designator | |||
| 2 Wire Edge Designator | Designator Description | Operator Manufacturer | Outlet Wire Color Code |
| T1 | 8.2K Ohm Resistor | Typically European Use | Green |
| T2 | 10K Ohm Resistor | Cornell / US Gear | Blue |
| LiftMaster / Chamberlain | |||
| Linear | |||
| Manaras | |||
| Micanan | |||
| Raynor | |||
| VE Power Door | |||
| Cookson | |||
| Lawrence | |||
| T3 | Diode Capacitor | Overhead Door (Only) | Red |
| T4 | Capacitor | Linear (Transmitter) | White |
| T5 | 6.8K Ohm Resistor | Custom Applications | Orange |
| T6 | 270K Ohm Resistor | LiftMaster CPS Board | Violet |
| 4 Wire Edge Designator | N/A | LiftMaster | None |
| SKU | MG110-K10-2E-05-T2 |
|---|---|
| Input Voltage | 24 DC, 24 AC |
| Cover Color | Black |
| Product Type | Edges |
| Edge Type | Standard |
| Edge Installation Type | Slide In |
| Color | Black |
| Monitored/Non-Monitored | Monitored |
| Manufacturer | Miller Edge, Inc. |