Miller Edge MGO20 4 ft Monitored T2 Gate Sensing Edge (10 ft Lead Wire) With Channel

When touched lightly, the pressure-sensitive Monitored T2 Gate Sensing Edge immediately sends an electrical signal to your controls to stop, and/or reverse operations. Designed for use in a wide variety of applications this 4 ft edge has a 10 ft lead wire and includes an aluminum mounting channel that allows for vertical or horizontal installations.
Part Number: MGO20-K10-2E-04-T2
$130.85 each
$130.85 each
OR
 

Details

Miller Edge MGO20 4 ft Monitored T2 Gate Sensing Edge (10 ft Lead Wire) With Channel

The small profile of the MGO20 Sensing Edge allows for versatility to suit a wide variety of applications. It has been tested as a recognized component to comply with the ANSI/UL325 Door, Drapery, Gate, Louver, and Window Operators and Systems standard. The Monitored Sensing Edge is 4 ft in length, with a 10 ft lead wire. This edge includes the ME120-C aluminum mounting channel that allows for vertical or horizontal installations. Great for motorized gates and doors, pinch-point protection, lifts and conveyors, machine guarding, elevator doors and rolling shutters, this reliable pressure-sensitive edge immediately sends an electrical signal to the controls to stop/reverse operations.

Features:

  • Color: Black
  • Small Profile
  • Touch Sensitive Sensing
  • Wire Outlet Location: End
  • T2 Monitored Sensing Edge
  • ANSI/UL325 Recognized Component
  • Mounts Vertically Or Horizontally
  • Includes ME120-C Aluminum Mounting Channel

Applications:

  • Machine Guarding
  • Rolling Shutters
  • Pinch Point Protection
  • Motorized Doors And Gates
  • Lifts, Elevators, And Conveyers

Specifications

  • Edge Length: 4 ft
  • Material: Flexible PVC
  • Lead Wire Length: 10 ft
  • Contact Element: Alumaglas®
  • Dimensions: 1-5/8" W x 1-7/8" H
  • Mounting Channel Material: Aluminum
  • Electrical Diagram: 2 Wire N.O. Configuration
  • Temperature Range: -30°F to +155°F
  • For Safe Operation, Use A Maximum 24 Volt AC/DC Power

Care of the MGO20

Minimum care is required for the MGO20 since it is manufactured with only the most durable materials and the highest quality control standards. However, sensing edges should be examined regularly for cuts or punctures which could damage internal components. Check wiring to be sure connections are secure. When properly maintained, the MGO20 offers years of trouble-free operation.

Monitored Sensing Edge Designator
2 Wire Edge Designator Designator Description Operator Manufacturer Outlet Wire Color Code
T1 8.2K Ohm Resistor Typically European Use Green
T2 10K Ohm Resistor Cornell / US Gear Blue
LiftMaster / Chamberlain
Linear
Manaras
Micanan
Raynor
VE Power Door
Cookson
Lawrence
T3 Diode Capacitor Overhead Door (Only) Red
T4 Capacitor Linear (Transmitter) White
T5 6.8K Ohm Resistor Custom Applications Orange
T6 270K Ohm Resistor LiftMaster CPS Board Violet
4 Wire Edge Designator N/A LiftMaster None

SKU MGO20-K10-2E-04-T2
Input Voltage 24 DC, 24 AC
Cover Color Black
Product Type Edges
Edge Type Standard
Edge Installation Type Slide In
Color Black
Monitored/Non-Monitored Monitored
Manufacturer Miller Edge, Inc.