Miller Edge MWRTA12 Gate Safety Transmitter with Alarm and Receiver (Includes MWR12 & MWTA12)

Includes single channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm. This feature that activates when the battery has only 25% of its life remaining, indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2 minute intervals.
Part Number: MWRTA12
$255.58 each
$255.58 each
OR
Quantity Price Each
  1+$255.58
  100+$211.33
 

Details

Miller Edge MWRTA12 Gate Safety Transmitter with Alarm and Receiver (Includes MWR12 & MWTA12)

Includes single-channel receiver (MWR12A) and transmitter (MWTA12) with audible low battery alarm. This feature activates when the battery has only 25% of its life remaining, indicating the battery should be replaced. The alarm sounds for 5 to 10 seconds at 1 to 2-minute intervals. The receiver operates on either 12 or 24 volt AC/DC and provides N.O. or N.C. output.

The Miller Edge Model MWTA12 safety edge transmitters are designed to provide wireless signal transmission from the safety edge to the motor controls. They are easily mounted and wired to the gate or door edge sensor. When the sensing edge comes into contact with an obstruction, a closed-circuit signal is created and is sent to the transmitter. The transmitter relays the information to the receiver and the receiver passes the signal along to the operator motor. The gate or door stops movement and will then reverse the direction of travel.

The transmitter comes with an Audible Alarm feature that activates when the battery is running low and needs to be replaced. Additionally, it comes standard with a NEMA 4 weatherproof enclosure. The enclosure can be easily mounted with the four mounting holes and screws provided. Both the Miller Edge receiver and transmitter have a compact design, which allows for easy troubleshooting via the see-thru case. Selectable features include coded dip switches and a wire harness for relay options.

Receiver Features:

  • Enclosure Material: Polycarbonate
  • Enclosure Color: Smoke
  • Mounting: 2 side flanges
  • Operating Frequency: 318 MHz
  • Modulation: On Off Keying
  • Code: Tri-state, Fixed, 1 of 19683 codes
  • Power Requirements: 10 to 40 VDC, 10-30 VAC (RMS)
  • Power Consumption: 60 mA (avg.) with Relay Off / 140 mA (avg.) with Relay On
  • Output: Dry Relay Contact, N/O & N/C 1A@60 VAC
  • Antenna: Attached, 18” #22AWG PVC insulated and Female F connector (grounded shell)
  • Electrical Configuration: Optional N/O or N/C
  • Maximum Operating Distance: 100 Feet (Optimal Conditions)
  • Address Decode Switch: 9 position, tri-state, DIP (19,683 programmable receiver codes)
  • Operating Temperature: -4°F to +140°F (-20°C to +60°C)
  • Connections: Wire, #22AWG, Red = Power Input, Black = Power Ground, White = Relay Common, Orange = Relay Normal Closed, Yellow = Relay Normal Open

Transmitter Features:

  • Enclosure Material: Polycarbonate
  • Enclosure Color: Black
  • Enclosure Rating: NEMA 4 including cable fitting
  • Response Time: Nominal 30 msec.
  • Operating Temperature: -4°F to 140°F (-18°C to 60°C)
  • Operating Frequency: 318 Mhz.
  • Maximum Operating Distance: 100 Feet (Optimal Conditions)
  • Power: (2) 1.5 Volt AA Lithium Battery (Included)
  • Audible Alarm: Included for monitoring the life cycle of the battery. Alarm is 80-95 dB at 2’
  • Transmitted Signal Duration: 4 to 5 seconds
  • Mounting: #6 self drilling screws included
  • Special Features: 19,683 programmable transmitter codes

SKU MWRTA12
Product Transmitter
Loop Channels 1 Channel
Monitored/Non-Monitored Non-Monitored
Manufacturer Miller Edge, Inc.
Product Type Wireless Edges