Details

Northstar Controls Single Channel Plug-In Vehicle Detector - NP2-ES

Northstar Controls Single Channel Plug-In Vehicle Detector - NP2-ES

The Northstar Controls NP2-ES is a single channel, dual output plug in vehicle loop detector all in a micro sized housing. The NP2-ES vehicle loop detector is the perfect accessory for your access system. Each detection device features plug-in compatibility with a variety of gate operators, four selectable sensitivities and frequencies, wrong voltage protection, separate LEDs for power/fault and detection, automatic sensitivity boost, and a 10 to 30 Volts AC or DC power requirement with a 5 mA nominal draw.

Features:

• 10-30V AC/DC, 5mA Nominal
• 10 Position Molex Connector
• 4 Selectable Sensitivities
• 4 Selectable Frequencies
• Wrong Voltage Protection
• Automatic Sensitivity Boost
• Front Panel/Fault Indicator
• Separate Power/Fault and Detect Indicators
• Plug-In Compatible With Most Popular Operators
• Temperature Range: -30º F to +180º F
• Dimensions: 2.40" H x 2.25" D x 0.80" W

Pin Connections:

1. Loop
2. Loop
3. Power - 10-30V AC/DC
4. Not Used
5. Not Used
6. Fail Output
7. Fail Output
8. Detect Output
9. Power 10-30V AC/DC
10. Power Common

Note: The Above Connections Are Shown With Correct Power Supplied And No Vehicle Present.

Specification Sheet