Radio Activated Sensor Click2Enter Emergency Access System C2E1

Details

Radio Activated Sensor Click2Enter Emergency Access System C2E1

The Click2Enter access system works with radio frequencies issued specifically to emergency responders to allow them entry through a gate. It combines scanning and receiving technology and acts as a type of radio-controlled key to open access control devices. In order to activate the Click2enter system, the operator must be close to the device and use short transmission pulses of a radio receiver. To increase security, the system requires a verification of the assigned carrier frequency.

Features:

• Mutual Aid Compatible
• Latch Open And Close Features
• Modified Scanning Receiver Radio
• Bright Activation LED And Power LED
• Variable Activation Range Via Programming
• Independent Relay Control For Roll-Up Doors
• 100 Channel Capacity (Primary Operational Bank)
• Works With Frequencies Issued Specifically To Emergency Responders
• Able To Receive Radio Transmissions To Include All Public Safety Bands
• Compatible With Analog Or Digital Radio Transmitters, Using Private Line Sub-Audible Transmissions

Specifications:

• Retrofit Kits Available For Operation Below 0° F
• Enclosure: NEMA 4-Rated
• Relay Or Dry Contact Ready
• Voltage: Regulated 12V To 24V DC @ 500ma Power Supplies