Diablo Automatic Vehicle Identification (AVI) Single Code Transmitter - AVI-X-1

Details

Diablo Automatic Vehicle Identification (AVI) Single Code Transmitter - AVI-X-1

The AVI-X-1 Diablo Automatic Vehicle Identification (AVI) Single Code Transmitter comes encased in a rugged housing. It transmits a single code and is compatible with existing systems from Detector Systems, IDC, US Traffic, and Reno A&E. The AVI-X-1 has an extra wire that can be attached to a switch normally mounted somewhere in the cab of the vehicle. This switch can cause the AVI-X-1 to transmit a secondary set of codes while the switch is activated. When the switch is deactivated, the transmitter will revert back to its primary code. The primary and secondary sets of codes can only have one code programmed per set. When a vehicle approaches a gated area, the code is received by a loop buried in the ground ahead of the gate or barrier.

Features:

• Comes Pre-Programmed
• Compatible With Existing AVI Systems
• Over 19,000 Different Codes To Choose From
• No Switches To Set, Simple Configuration
• Responds To Transmitters Made By Detector Systems, IDC, US Traffic and Reno A&E

Specifications:

• Operating Temperature: -40ºF to 176ºF
• Frequency 375KHz, FCC Compliant
• Humidity: 100% Relative Humidity
• Transmission Speed: Once Every 15 Milliseconds
• Dimensions: Base: 4.5" (D) x 1" (H), Bolt: 4.5" (H)
• Power Cable: 20', Four Conductor, Spiral Wound Cable
• Operating Current: 20-80 Milliamps Depending Upon Code Being Sent
• Fuse: Recommend Adding 1A Fast-Acting Fuse Prior To Power Attachment Point (Not Included)
• Operating Voltage: 10-20V DC Protected Form Momentary Overvoltage And/Or Voltage Reversal

View Cut Sheet

View Manual