Diablo DSP-10-117 Loop Detector with Socket Base (117V AC)

Details

Diablo DSP-10-117 Loop Detector with Socket Base (117V AC)

The DSP-10-LV 11-Pin Base Low-Voltage Parking Detector is designed to handle all access control, drive-through and parking applications. This vehicle detector can be used on entrance loops, safety loops or free exit loops. With dual relay outputs, extension, delay, pulse on exit or entrance and the flexibility to be either fail safe or fail secure, it's a comprehensive parking detection device that can meet the needs of virtually any application.

Features:

• Can Be Fail-Safe Or Fail-Secure
• Separate Power/Fail And Detect LEDs
• Normal Or Extended Hold Time Is Selectable
• Power Interruptions Of Short Duration Are Ignored
• Protected From Damage If Plugged Into A Higher Voltage
• Automatically Tunes Itself To The Best Operating Frequency
• Works On Any In-Ground Inductive Loop From 20 To 1000 uH
• Can Be Selected To Ignore Fast Moving Vehicles Over The Loop
• Can Be Used As Either A Safety Loop Or Free Exit Loop Detector
• Environmental Conditions Constantly Compensated With Hypertrack Software
• Inherent Noise Filtering Algorithms Allow It To Work Reliably In Any Electrical Situation
• Can Be Used In Special Applications To Insure Complete Detection Of High-Bed Vehicles

Specifications:

• Color: Yellow
• Voltage: 117V AC
• Pulse Output: 250ms ±15ms
• Switches: 10 sensitivity settings
• Operating Temperature: -35°F to 165°F
• Dimensions: 2.375" (H) X 1.75" (W) X 3.61" (D
• Configuration: Standard 11 pin connector in a small plastic case
• Frequency: Automatically tunes within one of four operating ranges
• Outputs: Two separate relay outputs with features that are front panel programmable

DSP-10 Cut Sheet

View Cut Sheet