Diablo Single Position Card Rack With Built-In Relay - RK-1-R

Details

Diablo Single Position Card Rack With Built-In Relay - RK-1-R

The Diablo RK-1-R Single Position Card Rack With Built-In Relay is designed to accept a plug-in vehicle detector on one side and accept the appropriate wires through the terminal block on the other. While many vehicle detectors are designed to be plugged into a rack, in installations where a large rack is not available, Diablo Controls has designed this helpful mini rack. The entire mini rack is supported by four adhesive standoffs that attach anywhere in the cabinet. The device is designed for detectors that have a solid state output, but need a single relay output.

Compatible With Diablo Models: DSP-13, AVI-40, DSP-40, and DSP-50.

Features:

• Includes four self-adhesive mounts
• Operates over a wide range of voltages, AC or DC
• Works with these Diablo Detectors: DSP-40, DSP-50, DSP-13, and AVI-40
• Single relay SPDT (Form C) output. A common, Normally Open And Normally Closed

Specifications:

• Output Ratings: 3 amps @ 125 V
• Operating Temperature: -35°F to 165°F
• Operating Voltages: 10.5 V to 30 V AC or DC
• Physical Size: 3” (H) x 1.5” (W) x 0.736” (D)

10-Pin Molex Pin Out:

1. Loop
2. Loop
3. AC Hot / DC +
4. No Connection
5. No Connection
6. No Connection
7. No Connection
8. Main A Output
9. No Connection
10. AC Neutral / DC COM

7-Pin Terminal Block Pin Out:

1. 30V AC Hot / DC +
2. AC Neutral / DC COM
3. Loop
4. Loop
5. Output Normally Open (Closes For Detect)
6. Ouput Common
7. A Output Normally Closed (Opens For Detect)

RK-1-R Cut Sheet