Diablo Three Position Card Rack With Built-In Relay - RK-3-R

Details

Diablo Three Position Card Rack With Built-In Relay - RK-3-R

The Diablo RK-3-R Three Position Card Rack With Built-In Relay is a mini-rack designed specifically for applications where a large rack is not available. It's engineered to be the soluation for the fact that many vehicle detectors are designed to be plugged into a rack and a mini-rack is the best fit. The RK-3-R is designed to accept up to 3 plug-in vehicle detectors on one side and accept the appropriate wires through the terminal block on the other. The entire mini-rack is supported by four adhesive standoffs that attach anywhere in the cabinet. This device is designed for detectors that have a solid state output, but need a single relay output.

Compatible With Diablo Models: DSP-13, AVI-40, DSP-40, and DSP-50.

Features:

• Includes four self-adhesive mounts
• Operates over a wide range of voltages, AC or DC
• Works Diablo Detectors: DSP-40, DSP-50, DSP-13, and AVI-40

Specifications:

• Output Ratings: 3 amps @ 125 V
• Operating Temperature: -35°F to 165°F
• Dimensions: 5" (H) x 3" (W) x 0.736" (D)
• Operating Voltages: 10.5 V to 30 V AC or DC
• Single relay SPDT (Form C) output - C, NO, NC

12-Pin Terminal Block Pin Out:

1. AC Line or DC + (10V to 30V)
2. AC Neutral or DC COM
3. Output 1 Normally Open (Closes For Detect)
4. Output 1 Common
5. Output 1 Normally Closed (Opens For Detect)
6. Output 2 Normally Open (Closes For Detect)
7. Output 2 Common
8. Output 2 Normaly Closed (Opens For Detect)
9. Output 3 Normally Open (Closes For Detect)
10. Output 3 Common
11. Output 3 Normally Closed (Opens For Detect)
12. Logic Common

6-Pin Terminal Block Pin Out:

1. Loop 1
2. Loop 1
3. Loop 2
4. Loop 2
5. Loop 3
6. Loop 3

RK3R Cut Sheet