Reno A&E H1-12-F Vehicle Loop Detector

The Model H1-12-F is a 12 VDC input power, single channel, three solid-state output vehicle loop detector with a built-in female connector.
Part Number: H1-12-F

$74.20 each
OR
 

Details

Reno A&E H1-12-F Vehicle Loop Detector

The Model H1-12-F is a direct replacement for the Model H-12-F. With enhanced features, H1 is plug-in compatible with existing Model H-12-F installations. The H1-LP detector is a low power version. To conserve power, the H1-LP detector output response times are slightly slower and the Detect LED is automatically disabled three minutes after reset or power up to minimize power usage. Both versions are full feature detectors in a compact package, making them the perfect addition to a vehicle detection system.

Features:

  • 4 Loop Frequencies
  • 8 Levels of Sensitivity
  • Delay Outputs A And B for 0, 2, 5, or 10 Seconds
  • Super Bright LED Indicators For Loop Fail and Detect/Delay
  • 3 Solid State OuputsA: Presence, Presense (Pulse-On-Entry, Pulse-On-Exit), Fail
  • Detect Memory Feature Maintains Detection During Power Outages Up To 2 Seconds
  • Sensitivity Boost for Gate Operation Where High-Bed Vehicles Might Be Encountered

Specifications:

  • Power: 12V DC
  • Configuration: 10 Switch, 10 Pin
  • Operating Temperature: -30°F To +180°F
  • Dimensions: 2.5" (H) X 2.75" (W) 0.85" (D)
  • Loop Inductance Range: 20 To 1000 Microhenries With Q Factor Of 5 Or Greater
  • Loop Feeder Length: Up To 2,500' Maximum With Proper Feeder Cable And Appropriate Loops

H1 Series Loop Detector

H1 Series Instructions

SKU H1-12-F
Product Loop Detector
Product Type Loop Detectors
Loop Channels Single Channel
Voltage 12V DC
Pin 10 Pin
Secure Side Status Optional
Manufacturer Reno A&E