SES SAT3 Emergency Tower 3 Meters - SAT3EMT3

Details

SES SAT3 Emergency Tower 3 Meters - SAT3EMT3

The SAT3EMT3 can dial a pre-programmed telephone number when the red "push for help" button is pressed. This is a self-identifying automatic telephone emergency tower from SES. The telephone line can power this device and requires no transformer. If the SAT3EMT3 line is busy, it will redial up to 10 pre-programmed numbers. Two-way voice communication is provided; there is no way to turn this off at the SAT3EMT3. The SAT3EMT3 sends DTMF to ID its location or SIA (Security Industry Association) Fast Format. This device can be monitored remotely and programmed up to 16 digits, with most working on several PBXs. Program the SAT3EMT3 with the hand-held programmer or use the 1200 baud modem.

Key Features:

• Central Station Compatible (SIA Fast Format)
• Powered By Telephone Line
• You Can Call 10 Pre-Programmed Numbers With "Push For Help"
• Calls Can Only End By Called Party, Time-Out, Or Call Progress Signals
• 3 Ways To Program: 1200 Baud Modem With Menus, Hand-Help Programmer, Or Touch Tone Telephone
• Senses Full Call Progress Signals
• Location Identified By Account Number Either With Zone (SIA Fast Format) Or DTMF
• Multi-Level Surge Supression

Specifications:

• Materials: All Metal Components
• Mounting: Surface Or On A Column (Call Button Should Be At 36" Or 48")
• Ringer Equivalence: .5A - 1.8B
• FCC Reg: CCPW74F-17213-MT-E
• Operating Temp: -20 Degrees F To 140 Degrees F
• Power Req: Audio Circuitry Is A Telephone Line Powered By A Standard Grade Voice Line. A 16-Volt AC Transformer Is Included For Relays
• Dimensions: 5”W x 7 5/8”H x 2½”D